Konica Minolta bizhub PRESS C1060 - Manual (Page 99)

Managing calibration tables
Calibrations window
You can edit and view all the calibration look-up tables (LUTs) that
are stored on the IC-309 print controller, but you can only edit the
latest LUT. You can find the calibration table information in Tools
> Resource Center > Calibrations.
Calibration table list
None
Jobs that have this option selected are processed and
printed without using a calibration table.
Normal
(default table)—This is a default table and cannot be edited.
If a calibration table has not been created for the media
type, and screening method that you are using, the Normal
calibration table is used when you process and print your
job.
<Calibration_table_name>
Calibration tables created in the Calibration Wizard.
Calibration table Info Data tab
Managing calibration tables 89