Konica Minolta bizhub PRESS C1060 User Manual
Page 210
Parameter
Option
Description
Marks and
barcodes
Enables you to add a mark set that was defined in the Resource
Center, and define on which sheets the marks appear.
Provides the following options:
●
All—Prints the marks on each sheet in your job.
●
Repetition—Prints the marks according to the frequency that you
define—for example, if you set the repetition to 3, the marks will
be printed every third sheet.
●
Sheet Range—Prints the marks according to the sheet range that
you defined. Provides the following options:
○
Type a range of sheets with a hyphen between the starting
and ending numbers in the range—for example,
1-5
.
○
Type a range of sheets with a hyphen or comma between the
starting and ending numbers, and where the last sheet=n.
●
1,n
(first and last sheets)
●
n–1
(the sheet before last)
●
n-
(the integer stands for the number of sheets
before the last sheet)
Note: The sheet range option is applicable to finishing marks,
registration marks and barcodes. If Sheet Range is selected
and a range is not entered, the job will not be submitted/
saved.
Slip Sheet
Slip sheets
between
copies
Prints slip sheets with your job. If a job is collated, the slip sheets are
printed between sets. If a job is not collated, the slip sheets are
printed between groups.
●
Same as job—Uses the same paper stock that is defined for the
job.
●
Paper Profile—Enables you to select the paper profile on which
to print the slip sheet.
○
Paper size—Select the desired paper size.
●
Tray—The tray in which the specified paper stock is loaded.
●
Frequency—Determines how often to print a slip sheet. after
each copy or after each 6 copies, and so on. The default is set to
1.
200
Chapter 11—Job parameters