Konica Minolta bizhub PRESS C1060 - Manual (Page 108)

Selecting a spot color variation
1. From the Tools menu, select Spot Color Editor.
2. In the Color list, type the name of the spot color or browse
through the list of spot colors, and then select the spot color
that you want to change.
3. Click the Variations button.
The Variations dialog box appears. The spot color is in the
center of the color patches and is marked 0.
4. Click and slide the Variation steps slider to see the different
variation steps between 1 to 7 color units of the original value.
Each unit refers to a dot percentage of the original value.
5. (Optional) To see the CMYK values of a color patch, roll your
mouse over the color patch.
The CMYK values appear in the lower-left corner of the dialog
box.
6. To select a variation of the spot color, click the desired color
patch.
The Before and After boxes show the difference between the
original spot color and the selected color patch.
98 Chapter 7—Managing color