Konica Minolta bizhub PRESS C1060 - Manual (Page 217)

12
Setting up your Creo
server
Preferences window
Manage your system and resources. The Preferences window is
available from the File menu.
Most of these settings are configured when the system is set up for
the first time. You should consult with the site administrator before
changing any of the server and network settings.
Option Description
Server Setup Displays the computer name (host name) of the IC-309 print
controller and the current date and time. The IC-309 print
controller is configured at the factory with a default generic
computer name (host name).
Note: The computer name can be 250 characters long, but
the shared name in your network may be cut to the first 15
characters of, due to the NetBIOS ComputerName
limitation.
Network Setup Displays the available network settings. Clicking Change
enables you to adjust these settings.
Remote Tools Setup
Provides the following options:
● Enable WebViewer—Enables you to use the Web
Viewer to connect from your computer to the IC-309 print
controller via the network.
● Enable Remote Connection—Enables you to open an
actual workspace for a selected server on your computer
and import jobs, print jobs, preview jobs, and perform
certain workflows. Several users can connect to the
same server simultaneously from different remote
workstations. Clicking Remote Connections Viewer
enables you to view a list of the available remote
connections.
Note: If you change any of the above settings, restart the
IC-309 print controller software for the changes to take
effect.