Konica Minolta bizhub PRESS C1060 - Manual (Page 155)

Parameter Option Description
BCOCA
adjustments 1D BCOCA
(barcode)
adjustments Provides the following options:
● Bar reduction—Enables you to select the reduction
value. You can enter positive numbers from 1 -10.
● Space reduction—Enables you to select the reduction
value. You can enter positive numbers from 1 -10.
2D BCOCA
(barcode)
adjustment Element reduction—Enables you to select the reduction
value. You can enter positive numbers from 1 -10.
PDF overlay Path for PDF
overlay Provides the following options:
● Front PDF overlay—Enables you to locate a PDF file
that will be used to overlay the front page.
● Back PDF overlay—Enables you to locate a PDF file
that will be used to overlay the back page.
Note: For wide configuration presses, you can print 2-up
and N-up. The PDF overlay is applied per page, and must
be designed in the page size. For 2-up, the PDF overlay is
placed twice on the sheet.
Advanced Settings Render IO
overlays before
page content
Selecting this option enables the overlays included in the
Include Object (IO) command to be rendered prior to other
elements on the page, thus ensuring the expected print
results.
Print white IOCA
image as Provides the following options:
● Opaque—Any elements that are under the white IOCA
image will not be visible.
● Transparent—Any elements that are under the white
IOCA image will be visible.
● Transparent only on back—Only on back side any
elements that are under the white IOCA image will be
visible.
● Transparent only on front—Only on front side any
elements that are under the white IOCA image will be
visible.
Support font
modification Font modification parameters alter the appearance of a
typeface. By default, the following font modification
parameters are defined: double high, italics, double strike,
bold and double wide.
If this option is not selected, font modification does not take
place
Print parameters
Note: The IPDS workflow is available only with the Trans Pack.
Print parameters 145