Konica Minolta bizhub PRESS C1060 - Manual (Page 151)

freeze status in the Incoming queue, until switching back to File
Submission mode.
● The Import button and also most of the IC-309 print controller's
tools such as calibration, job preview, gradation and more are
unavailable. Some stay accessible, for example—the resource
center, spot colors editor and job alerts.
Selecting the IPDS workflow mode
Note: The IPDS workflow is available only with the Trans Pack.
1. In the IC-309 print controller workspace, select File >
Preferences.
2. Select Workflow Mode, and then select IPDS.
3. Click Apply.
Your system is now ready to process and print files using the
IPDS workflow.
Enabling end of job timeout
Note: The IPDS workflow is available only with the Trans Pack.
Use this setting when the last pages of a job are not printed, and
the job remains in the Incoming Queue.
1. In the IC-309 print controller workspace, select File >
Preferences.
2. Select IPDS Settings, and then select Enable end of Job
timeout.
3. Click Save.
Note: If the IPDS host does not send a Define Group Boundary, this
option sets the time out to close the job on the Creo server.
Creating and editing an IPDS printer
Note: The IPDS workflow is available only with the Trans Pack.
1. From the Tools menu, select Resource Center.
2. From the Resource list, select IPDS Printers.
3. Click the New button to add a new printer, or the Edit button
to edit an existing printer.
Note: To edit an existing printer, select the required printer and then
click the Edit button.
Selecting the IPDS workflow mode 141