Konica Minolta bizhub PRESS C1060 - Manual (Page 42)

c. Repeat the above steps for all the color separations in the
calibration chart making sure to scan each color separation
in the order in which the icons appear on the calibration
chart: cyan, magenta, yellow, and then black .
When all of the color separation rows have been successfully
scanned, there is a check mark above each of the color
separation icons.
Notes:
● Click Reset at any stage in the scanning process if you want to start
the scan again.
● If an error occurs while scanning the chart, an alert message
appears. Click OK and re-scan the chart.
After the last color separation row (black) is successfully
scanned, the Save page of the Calibration wizard appears.
32 Chapter 3—Calibration