Konica Minolta bizhub PRESS C1060 - Manual (Page 34)

13. In the Select Destination area, select the destination volume
in which you want to install the Print Driver software, and click
Continue.
14. Click Install.
15. Type your login name (if necessary) and password, and click
OK.
16. Click Close.
The Print Driver software and PPD are installed.
Note: If you deactivate the Print Driver software, you can still use the PPD
because it has already been installed.
Defining a printer with the Print Driver software in Mac OS X
10.6 (64 bit) and later
Requirements: The following information must be available:
● IP address or computer name of your IC-309 print controller
● Name of the network printer that you want to use with the Print
Driver software
1. On your Mac computer, using the Apple icon, open the
System Preferences window and double-click Print & Scan.
2. In the Print & Scan window, click +.
Note: You can also define your printer using the Default option.
3. In the Printer Browser window, click the IP Printer tab, and
enter the following information:
○ In the Address box, type the address of your server.
○ In the Queue box, type the name of the network printer that
you want to use with the Print Driver software—for
example,
CreoCS_Process .
○ In the Name box, type a name for the printer.
○ In the Print Using list, select Other.
4. Navigate to Library / Printers / PPDs / Contents /
Resources / en.lproj , select either Europe-A4 or US-
Letter , and then select the IC-309.PPD file.
5. Click Open.
6. Click Add.
The network printer is defined with the PPD file.
24 Chapter 2—Setting up your computer for printing