Konica Minolta bizhub PRESS C1060 - Manual (Page 214)

Parameter Option Description
PDF
optimization Significantly the decreases processing time for PDF jobs with
repeated elements by applying a workflow intended for PDF jobs.
Job slug Color bar Prints a measurable color bar. Looking at this bar, you can tell the
state of the printer and whether the quality is consistent. You might
need to calibrate the printer or perform color proofing.
Job name Prints the name of the job in the margin of the sheets.
Sheet number
and side
(front/back) Prints the sheet number and side (front or back) in the margin of the
sheets.
Date and time Prints the date and time in the margin of the sheets.
ISO
conformance
level Prints the ISO conformance level in the margin of the sheets—for
example, Validation Print according to ISO 12647-7.
Printer
description Prints the name and model of the printer in the margin of the sheets.
Creo server
description Prints the name and model of the server in the margin of the sheets.
Colorant and
media Prints details about the loaded paper and the color mode in the
margin of the sheets.
Color profiles Prints the names of the color profiles that were selected in the job
parameters window.
Calibration
date Prints the date calibration was last performed in the margin of the
sheets.
Screening Prints the images, graphics and text that has been converted to
halftone dots.
Comment Enables you to add comments containing up to 30 characters.
Preflight Run Preflight Checks the status of the main file only (default), including fonts, high
resolution images, and spot colors, before the job is sent for printing.
If required, you can select to include the external elements in the
check.
Your job is RIPed and the missing components are identified.
● Run extended preflight check— Performs an extended preflight
inspection of the files running in the incoming queue. Clear this
check box if you only want a basic preflight check to be performed
on files running in the incoming queue. A basic preflight check
validates that external elements and AFP resources are missing.
○ Inspect the main file only—Checks the status of the main file
only (default).
○ Inspect also external elements—Includes external elements
in the preflight check, and checks for spot colors and fonts in
those external elements.
204 Chapter 11—Job parameters