Konica Minolta bizhub PRESS C1060 - Manual (Page 154)

Parameter Option Description
Default font The selected font is used as the default font for the job,
unless the IPDS stream already contains the fonts.
Default font size Enables you to set the default font size for the default font.
Font substitution Provides the following options:
● Relaxed—The IPDS host reports few exceptions
● Strict—The IPDS host reports when a font combination
that is requested by the IC-309 print controller is invalid.
IPDS trays
mapping IPDS trays
mapping Provides the following options:
● Input tray ID
● Output tray ID
Resource capture Resource capture Provides the following options:
● Capture fonts
● Capture data objects
Layout Cut sheet
emulation Provides the following options:
● Use cut sheet emulation, provides the following
options:
○ Auto (According to host)—Settings are
automatically taken from the IPDS host.
○ On—The cut sheet option is always turned on
regardless of the settings on the IPDS host.
○ Off—The cut sheet emulation is turned off regardless
of the settings on the IPDS host.
● Emulation method—Determines the direction and
rotation of each sheet.
Note: This is applicable whether you have selected cut
sheet emulation on the IC-309 print controller or if the
IPDS host initiates the cut sheet emulation.
● Partition offset X/Y—Determines the partition offset on
each axis, X and Y.
Banner page
handling Enables you to specify that the job contains a banner page.
If the job is defined to print with a banner page (first
information sheet) then the banner page is printed on a
separate sheet. The banner page does not affect the page
order of the job.
Rotate 180 Enables you to specify the rotation of the image on the
printed sheet. You can apply 180 degrees rotation
independently to both the front and back sides.
144 Chapter 8—Production workflows