Konica Minolta bizhub PRESS C1060 - Manual (Page 48)

1. From the Tools menu, select Calibration or select the
Calibration icon on the toolbar.
2. From the Measuring device drop-down list, select i1iO.
The following message appears while the IC-309 print
controller connects to the I1iO.
3. From the Tray drop-down list, select the tray from which you
want to print.
The paper size in the selected tray appears.
Note: There is no need to change the default settings for Screening or
Engine Calibration.
4. In the Number of copies box, enter the number of copies you
want to print.
5. If you do not want to print a calibration chart continue with step
9 on page 30 .
6. Click Print.
The calibration chart prints using the standard screen and
resolution of 1200 dpi.
38 Chapter 3—Calibration