Konica Minolta bizhub PRO 1051 - Manual (Page 88)

Installation of the printer driver (Macintosh) 5
bizhub PRO 1200/1200P/1051 Printer 5-11
– If the selected printer is registered in the printer list, the setting pro-
cedure is completed.
Specifying the IPP settings
Specifying the TCP/IP setting for this machine:
Specify the IP address of this machine.
IPP setting for the copier:
Enable IPP print in the IPP Setting screen of the copier.
For details on IP Address and the IPP settings of this machine, refer to the
User’s Guide [POD Administrator’s Reference or Main Body].
Specifying the TCP/IP setting for the computer
1
On the “Apple” menu, select “System Preferences”.
2
Click the “Network” icon.
3
From “Show”, select “Built-in Ethernet”.
4
Click the TCP/IP tab.
5
Select “Configure” items according to the settings for the network to
which the Macintosh computer is connected, and then specify the IP
address and subnet mask.
6
Click the close button at the upper left corner of the dialog box.
– When the “Apply configuration changes?” message appears, click
the [Apply].
Adding a printer
1
Select “HDD” - “Applications” - “Utilities” where the driver was in-
stalled, and then double-click “Printer Setup Utility” to open it.
2
When the Add Printer dialog box appears, click the [Add]. When the
printer list appears, click the [Add].
3
Click the [IP Printing].
4
Select “Internet Printing Protocol” from “Printer Type”.
5
In “Address”, enter the IP address of this machine.