Konica Minolta bizhub PRO 1051 User Manual
Page 247
PostScript PPD Printer Driver setting (Windows)
9
bizhub PRO 1200/1200P/1051 Printer
9-39
Wait Mode - Wait Mode/Proof and Print/Proof and Print (1st sheet)
Outputs the test print and checks the current setting from the control panel
of copier. Use this when printing a large volume document, such as multiple
sets of pages.
1
Open the file to be printed and select [File] - [Print] of application.
2
Click [Preferences] to open the
[Printing Preferences] window and
then click [Advanced].
3
Click [
▼] besides the [Wait Mode] to display the list. Then select [Wait
Mode], [Proof and Print] or [Proof and Print (1st sheet)] and click [OK]
to close the [Advanced Options] window.
–
Select [Wait Mode] to wait before printing the document to check
the current setting from the control panel of copier.
–
Select [Proof and Print] to print the one copy as a test to check the
output and the current setting from the control panel of copier.
–
Select [Proof and Print (1st sheet)] if you want to print only the first
page for checking the current setting.
4
Click [OK] to close the [Printing Preferences].
5
Click [Print] to perform printing from the application.
–
When the [Wait Mode] is selected, it stops without being printed.
–
When the [Proof and Print] is selected, only one set is printed and it
stops.
–
Select [Proof and Print (1st sheet)] if you want to print only the first
page for checking the current setting.
The copier is stopped temporarily and the Mode Check screen is dis-
played.