Konica Minolta bizhub PRO 1051 - Manual (Page 234)

PostScript PPD Printer Driver setting (Windows) 9
bizhub PRO 1200/1200P/1051 Printer 9-26
[245-300g/m
2
] or [301-350g/m
2
] cannot be set in the following cases:
- When [Paper Source Unit] is not available in the [Device Setting] tab.
Paper Color
Selects the colors of the output paper as shown below:
-
No Setting
- White
- Clear
- Yellow
- Pink
- Blue
- Green
Pre-Punched
Selects whether the paper as the output paper is pre-punched or not.
Output Tray
Selects the output tray.
The [Output Tray] cannot be set in the following cases:
-
Available option which is not selected in the [Device Settings] tab.
- When [Staple] is available, any item other than [Default] and [Main Tray]
can not be set.
Output Order
Selects the output order.
[Face Down] outputs paper with the printed side facing down.
[Face Up] outputs paper with the printed side facing up.
Image Order
Selects the printing order of documents.
[1 to N] outputs the first page.
[N to 1] outputs the last page.
Pile Permission
When another printed document remains in Stacker, gives the permission to
stack the output.
Setting the Pile Permission to OFF allows no pile on the stacker.
301-350g/m
2