Setting up an aix 4.0 system – Konica Minolta bizhub PRO 1051 User Manual
Page 329
Utility Tool
13
bizhub PRO 1200/1200P/1051 Printer
13-29
7
After you have supplied all values, press Enter.
You can now print.
Setting Up an AIX 4.0 System
Use these procedures to install the network interface card in a AIX 4.0 sys-
tem:
1
Run SMIT Printer.
2
Select [Print Spooling].
3
Select [Add a Print Queue].
4
Select [Remote].
5
Use [Standard Processing].
6
Assign a queue name.
7
Use the host address of the Network Interface Card for the Remote
System.
8
Use [PRINT] for the queue on the remote system.
9
Add a description (optional).
10
Press [Enter] to generate.
–
Installation is complete. Test your printer by executing the following
command:
–
lp -d
Data Requested
Example
Data Description
Name of queue to ad
print1
Name of local printer
queue Destination Host
printfast
NIC IP hostname
Short Form Filter
/usr/lpd/bsdshort
Required value
Long Form Filter
/usr/lpd/bsdlong
Required value
Name of remote printer
queue
Network interface card
Name of device to add
print1
Name of local queue