Konica Minolta bizhub PRO 1051 - Manual (Page 333)

Utility Tool 13
bizhub PRO 1200/1200P/1051 Printer 13-33
Setting Up System V Release 4 and Solaris 2.X to Use lpd
If your system recognizes the LPSYSTEM command, you do not need to in-
stall the dedicated utility, Konica Minolta's host-side software. Another op-
tion is the admintool if your system supports it.
LPSYSTEM Installation
The following procedure must be executed from the Bourne Shell.
Type: SH then press Enter to enter the Bourne Shell program.
Use the following procedures to install LPSYSTEM:
1
lpsystem -t bsd < Print server host name in /etc/hosts file >
2
lpadmin -p -s
– !PRINT
– Your system may want its IP address instead of the remote host
name.
3
Enable
4
Accept
5
Printing on Linux