Konica Minolta bizhub PRO 1051 - Manual (Page 181)

PCL Printer Driver Setting (Windows) 8
bizhub PRO 1200/1200P/1051 Printer 8-50
Cover Print 3 in 1
After cutting and pasting automatically the first page of the original on the
front cover, the last page but one (n - 1 page) on the back cover, and the last
page (n page) on 3in1 as the spine, the front cover is printed.
And the second page up to the last page but two (n - 2 page) are printed as
the body of documents.
And it is necessary to set in advance the width of the spine to the paper thick-
ness. The setting can be made in units of 0.1 mm with the setting range be-
tween 1 to 30 mm.
NOTE:
The use of [PI Tray] and [PI-PFU Tray] is not available for [Cover Print 3in1].
Ex.: When using [Cover Print 3in1] for the perfect binding.
Paper Type (Paper Name)
Make a selection to decide if complying with the Default Setting or using the
name registered in the information of the Paper Name.
Cover Duplex
Turn it [ON] when you want to make the cover of Perfect Binding double-sid-
ed.
Cover Trimming
Turn it [ON] when you cut out the cover of Perfect Binding.
Spine Width
A setting is made for the width of Spine.
Cover Print 3in1 (Both sides)
n-
3