Konica Minolta bizhub PRO 1051 - Manual (Page 172)

PCL Printer Driver Setting (Windows) 8
bizhub PRO 1200/1200P/1051 Printer 8-41
Center Staple and Fold
Staples at the center of the output paper and folds it into half.
The [Center Staple and Fold] cannot be set in the following cases:
-
When [Saddle Kit] is not available in [Configure] tab.
Punch
The output paper can be set to be punched with 2 holes, 3 holes, 4 holes or
Multi Punch.
The position will be changed according with the [Binding Position] setting.
The [Punch] cannot be set in the following cases:
-
When [Multi Folder] is not available in [Configure] tab.
- When [Booklet] is selected in [Setup] tab - [Print Type].
The [Multi Punch] cannot be set in the following cases:
-
When [Multi Punch] is not available in [Configure] tab.
2 Holes / Left Binding
(Portrait)
2 Holes / Left Binding
(Landscape)
2 Holes / Right Binding
(Landscape)
2 Holes / Right Binding
(Portrait)
ABCD ABCD
2 Holes / Top Binding
(Portrait)
2 Holes / Top Binding
(Landscape)
ABCD
ABCDEF ABCDEF
ABCDEF
Multi Punch / Top Binding
(Portrait)
Multi Punch / Top Binding
(Landscape)
ABCD
ABCDEF