Setting up an as/400 system to use lpd – Konica Minolta bizhub PRO 1051 User Manual
Page 331
Utility Tool
13
bizhub PRO 1200/1200P/1051 Printer
13-31
Setting Up an AS/400 System to Use lpd
When working with the output queue description (WORKOUTQD), there are
several fields that must be defined for the network interface card to function
properly as a remote printer device.
Use the following procedure to define fields for the network interface card to
make it function as a remote printer:
1
When prompted for the remote system, type INTNETADR so the AS/
400 recognizes the device as an IP device
2
Port must be [PRINT].
3
Connection type must be [IP].
4
Internet address must be the IP address of the network interface card.
5
Destination type must be [OTHER].
6
When prompted for transforming SCS to ASCII, type YES to allow the
AS/400 do the character translation.
7
Manufacturer type and model must be the print driver that goes with
your image controller.