Konica Minolta bizhub PRO 1051 - Manual (Page 73)

Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) 4
bizhub PRO 1200/1200P/1051 Printer 4-41
– Clear the “Automatically detect and install my Plug and Play print-
er” check box.
The Select a Printer Port dialog box appears.
6
Click “Create a new port”, and select “Standard TCP/IP Port” for “Type
of port:”.
7
Click the [Next].
– The Add Standard TCP/IP Printer Port Wizard starts.
8
Click the [Next].
9
In the “Port Name” box, enter “\\NetBIOS name\print service name”.
10
Click [Open].
11
Click the [Have Disk].
12
Click the [Browse].
13
Specify the desired folder on the Driver CD that contains the printer
driver, and then click the [Open].
– Select printer driver (PCL, PostScript PPD) to be used.
– For details of the built-in CD-ROM construction, see “Folder struc-
ture on the CD-ROM (bizhub PRO 1200/1200P/1051 Driver CD-
ROM)” on page 1-6.
14
Click the [OK].
The “Printer” list appears.
15
Click the [Next].