Konica Minolta bizhub PRO 1051 - Manual (Page 292)

Troubleshooting 11
bizhub PRO 1200/1200P/1051 Printer 11-4
11.3 General Problems of PostScript
A PostScript Error message displays.
A search can be made from [http://www.adobe.com/cfusion/search/in-
dex.cfm?CAT=support&TERM=&LOC=en%5Fus].
A PostScript Error message displays when attempting to get a printout
from any computers are in use.
There may be loose connections in the printing system. Recheck all of con-
nections.
A PostScript Error message displays when attempting to get a printout
from a specific application.
Error conditions may exist in the application. Try to print out a simple test file.
If this also does not succeed, reinstall the application in question.
A PostScript Error message displays when attempting to get a printout
from a specific file.
It is possible that the print setting for the file is wrong, that graphics con-
tained in the file are damaged, or that bad elements are contained in the file.
Find a print setting that does not cause any PostScript Error message to ap-
pear, and try to get a printout. If this fails, save the file as a new file.
Fonts cannot be downloaded.
It is possible that [Spool Print Jobs in HDD before RIP] is set to [Enable] in
Printer Setting Menu on the copier’s control panel.
Set [Spool Print Jobs in HDD before RIP] to [Disable], switch off the copier’s
main power, wait 10 seconds or more, switch it back on, and then try down-
loading fonts again.
For details on how to download fonts, refer to the User’s Guide that comes
with the fonts.