Konica Minolta bizhub PRO 1051 - Manual (Page 38)

Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) 4
bizhub PRO 1200/1200P/1051 Printer 4-6
– When using an SMB connection, enter “\\NetBIOS name\print serv-
ice name” in the “Enter a port name” box.
– Enter the same NetBIOS name and print service name those
appear in “Print Setting” in the SMB Setting screen of the copier.
8
Click the [Next].
– If the Additional Port Information Required dialog box appears, go
to step 9
– If the Install the printer driver dialog box appears, go to step 12.
9
Select [Custom], and then click the [Settings].
10
Change the settings according to the port, and then click the [OK].
– For a Port9100 connection, select “RAW”, and then enter the RAW
port number (9100 at default) in the “Port Number” box.
– For an LPR connection, select “LPR”, and then enter “Print” in the
“Queue name” box.
– The information entered here is case-sensitive.
11
Click the [Next].
The Install the printer driver dialog box appears.
12
Click the [Have Disk].
13
Click the [Browse].
14
Specify the desired folder on the CD-ROM that contains the printer
driver, and then click the [Open].
– Select printer driver (PCL, PostScript PPD) to be used.
– For details of the built-in CD-ROM construction, see “Folder struc-
ture on the CD-ROM (bizhub PRO 1200/1200P/1051 Driver CD-
ROM)” on page 1-6.
15
Click the [OK].
The “Printers” list appears.