Konica Minolta bizhub PRO 1051 - Manual (Page 29)

Installation of the printer driver (Windows) (Easy installation using the installer) 3
bizhub PRO 1200/1200P/1051 Printer 3-1
3 Installation of the printer driver
(Windows) (Easy installation using the
installer)
This installer automatically detects whether this machine is connected via
USB or on the same TCP/IP network as the computer, then installs the
required printer driver. You can also manually specify the connection
destination during installation.
2
Note
The printer driver which can be installed as described in this section is
“PCL Driver” only.
Refer to “Compliant OS” on page 4-1 for more information about compli-
ant OS.
Refer to “Installation of the printer driver (Windows) (Manual installation
using the Add Printer wizard)” on page 4-1 when installing the printer
driver with “PostScript PPD”or refer to “Windows Vista/Server 2008” on
page 4-15 when installing the printer driver manually.
Refer to “Mac OS X (10.3/10.4/10.5)” on page 5-1 when installing to Mac-
intosh.
Refer to “Procedure for installation with Linux” on page 14-4 when in-
stalling to Linux.
Installation of the printer driver
1
Insert the “Driver CD” into the CD-ROM tray of the personal computer.
– Check that the installer starts up, and then continue with step 2.
– If the installer does not start up, open the printer driver folder on the
CD-ROM, double-click “Setup.exe” for the 32bit editions OS and
“Setup64.exe” for the 64bit editions OS, and then proceed to Step
3.
– When a screen relevant to “User account control” is displayed while
in installation in Windows Vista/7/Server 2008, click [Allow] or [Con-
tinue].
2
Click [Printer Install] - [PCL].