Konica Minolta bizhub PRO 1051 - Manual (Page 69)

Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) 4
bizhub PRO 1200/1200P/1051 Printer 4-37
4.5 Windows 2000
4.5.1 Network connection (LPR/Port9100)
When using the LPR/Port9100 printing, specify the port during the printer
driver installation process.
TCP/IP setting for this machine
Specify the IP address in the TCP/IP Setting screen of this machine.
For details on specifying the IP address of this machine, refer to the User’s
Guide [POD Administrator’s Reference or Main Body].
RAW port number setting for the copier
To use Port9100 printing, enable the RAW port number (9100 at default), in
the TCP/IP Setting screen of the copier.
For details on specifying the RAW port number of this machine, refer to the
User’s Guide [POD Administrator’s Reference or Main Body].
LPD setting for the copier
To use LPR printing, enable LPD print in the LPD Setting screen of the copier.
For details on the LPD settings of this machine, refer to the User’s Guide
[POD Administrator’s Reference or Main Body].
Printer driver installation using the Add Printer Wizard
0 The installation should be performed by a qualified system administrator
or printer administrator.
1
Insert the Driver CD into the CD-ROM drive of the computer.
2
Click the [Start], point to “Settings”, and then click “Printers”.
3
Double-click “Add Printer”.
– The Add Printer Wizard starts.
4
Click [Next].
5
In the dialog box for specifying the connection method, select “Local
printer”, and then click the [Next].