Konica Minolta bizhub PRO 1051 - Manual (Page 335)

Utility Tool 13
bizhub PRO 1200/1200P/1051 Printer 13-35
The flowchart for the operation of ToneCurve Utility is as described below.
2
Note
Files in excess of 10 pages cannot be added to the Test Chart.
1.
2.
3.
4.
5.
6.
7.
8.
Start of the ToneCurve Utility.
Selection of a printer.
Settings completed
A setting is made with
the tone curve of the [Screen tab] of
the PPD Plug-in driver for printing.
When a test chart is
used that has been
registered: When any test chart
is arbitrarily used:
Adjustment of the ToneCurve Utility.
(An adjustment can be made either
by the drag and drop of the mouse or the slider.)
Verification of the output
by means of the test chart.
Click [Print] in the Print Settings screen.
Adjust the tone curve again, if necessary.
Saving of the tone curve and
default setting of the tone curve
(Saved in the image controller.)
Select a registered test chart
from the pull-down list.
Click [Add] to select a file
(restricted only to PS and
PDF files).
(The registration of up to
10 files is available.)