Festo Электромотор MTR-DCI - Manual (Page 74)

Enter password:
[?xx] =
ESC
EDIT <--> OK
New Password:
[?xx] =
ESC
EDIT <--> OK
4. Control panel (MTR-DCI-...-H2IO)
4-16
Festo P.BE-MTR-DCI-IO-EN en 1209d
Modify/deactivate password
[Password] Select [Settings] [Password] in the menu:
Enter the existing password with 3 figures. The current entry
position is marked with a question mark.
1. Use the arrow buttons to select a figure 0...9.
2. Confirm your entry with OK . The next entry
position will be displayed.
3. Repeat the entry for the further entry positions.
4. Enter the new password with 3 figures. If you wish to
deactivate the password, enter “000”.
5. After entering the third figure, save your setting with
SAVE .
• Keep the password for the MTR-DCI in a safe place, e.g.
with the internal documentation for your system.
If the active password in the MTR-DCI should be lost in spite
of care being taken:
you can delete the password by entering a master password.
In this case please contact your Festo Service partner.