Festo Электромотор MTR-DCI - Manual (Page 123)

A. Technical appendix
A-3
Festo P.BE-MTR-DCI-IO-EN en 1209d
A.1 Technical specifications
General
Protection class as per EN 60529 IP54 (Plug connector inserted or fitted with protec-
tive cap)
Relative humidity 0 to 95 %, non-condensing
Temperature range
– Operation
– Storage/transport
0 ... +50 °C
-25 ... +60 °C
Vibration As per DIN/IEC 68/EN 60068 part 2-6:
Severity level 2:
0.35 mm path at 10 ... 60 Hz;
5 g acceleration at 60 ... 150 Hz
Shock As per DIN/IEC 68/EN 60068 part 2-27
Severity level 2:
±30 g at 11 ms duration;
5 shocks in each direction
Protection against electric shock 1)
(protection against direct and indirect contact
as per IEC/DIN EN 60204-1)
By connection to a PELV power unit
(Protected Extra-Low Voltage)
Electromagnetic compatibility (EMC) 2) See conformity declaration (www.festo.com)
Gear type Planetary gear
Encoder (with 4-fold evaluation) 500 x4 —> 2000 inc/revolution
MTR-DCI-32: 300 x4 —> 1200 inc/revolution
Temperature monitoring Switching off at temperature > 70 °C
Display resolution 128 x 64 pixels
Serial interface RS232, 9600 baud
1) The device is intended for industrial use.
2) The maximum permitted I/O signal cable length is 30 m.