Festo Электромотор MTR-DCI - Manual (Page 18)

Contents and general instructions
XVI
Festo P.BE-MTR-DCI-IO-EN en 1209d
Term/abbreviation Meaning
Software end position Programmable stroke limitation (basis point = axis zero point)
– Software end position, positive:
max. limit position of the stroke in the positive direction; must not be
exceeded during positioning.
– Software end position, negative:
min. limit position in the negative direction; must not be exceeded
during positioning.
Teach mode
(Teach mode) Operating mode for setting positions by moving to the target position,
e.g. when creating position sets.
Tab. 0/3: Index of terms and abbreviations