Festo Электромотор MTR-DCI - Manual (Page 14)

Contents and general instructions
XII
Festo P.BE-MTR-DCI-IO-EN en 1209d
Manuals on motor unit MTR-DCI
This manual contains information on the method of oper-
ation, as well as on mounting, installing and commissioning
electric positioning drives with motor unit MTR-DCI-...IO (I/O
interface).
Information on components, e.g. the reference switch, can be
found in the operating instructions supplied with the prod-
uct.
Type Designation Contents
Operating package with
brief description
+ descriptions
(+ commissioning
software) on CD ROM P.BE-MTR-DCI Brief description: Important instructions
on commissioning and preliminary
information.
Manuals on CD ROM: for motor unit
MTR-DCI (contents as described below)
Description Motor unit MTR-DCI with
I/O interface
P.BE-MTR-DCI-IO-DE
P.BE-MTR-DCI-IO-EN
P.BE-MTR-DCI-IO-FR
P.BE-MTR-DCI-IO-IT
P.BE-MTR-DCI-IO-ES
P.BE-MTR-DCI-IO-SV Installation, commissioning and
diagnosis of electric axes with motor
unit MTR-DCI; communication via I/O
interface.
Help system for software Festo Configuration Tool
help (contained in FCT
software) Function description of the Festo
Configuration Tool (FCT) configuration
software.
Operating instructions Positioning axis
DMES-... Mounting and commissioning the linear
axis with slide shaft as drive element.
Further manuals Motor unit MTR-DCI with
other communication in-
terfaces e.g.
P.BE-MTR-DCI-CO
P.BE-MTR-DCI-PB Installing, commissioning and diagnos-
ing electric axes with motor unit MTR-
DCI; communication via the relevant
field bus.
Tab. 0/1: Documentation on the MTR-DCI