Festo Электромотор MTR-DCI - Manual (Page 62)

4. Control panel (MTR-DCI-...-H2IO)
4-4
Festo P.BE-MTR-DCI-IO-EN en 1209d
4.1 Composition and function of the control panel
The control panel enables commissioning directly on the
MTR-DCI with the following functions:
– Parametrizing and referencing the axis
– Entering position sets
– Test functions e.g. for moving to individual position sets.
1
LC display
2
Operating buttons
3
LEDs
– Power (green)
– I/F (green/red)
– Error (red)
1 3 2
Fig. 4/1: Control panel of the MTR-DCI-...-H2
With the 4 buttons on the control panel you can carry out all
operating functions and settings as indicated in the menu.
The graphic LCD display shows all texts in English. The dis-
play can be turned in 90° steps, see menu command [LCD
adjustment].
The visual display of the operating states is shown via 3 LEDs
(see also chapter 6.2.2).
– Power: display of power supply
– I/F: ready to operate, positioning status
– Error: fault