Festo Электромотор MTR-DCI - Manual (Page 30)

1. System summary
1-12
Festo P.BE-MTR-DCI-IO-EN en 1209d
Measuring reference system: basis points and work range
d
e
Linear axis with homing method:
Fixed stop negative
Rotation axis with homing method:
Reference switch negative
REF Reference point: Point determined during homing run: reference switch or stop
AZ Axis zero point: reference point for the project zero point and the software end positions.
Corresponds to the project zero point with the MTR-DCI (offset project zero point = 0).
The basis point for the axis zero point is the reference point.
A
b, c Offset axis zero point: Defined distance of the axis zero point AZ from the reference point REF
Software end positions: limit the permitted positioning range (work stroke).
d
e Work stroke: Permitted positioning range.
Rated stroke of the axis used
Tab. 1/3: Measuring reference system