Pulsafeeder Pulsar DLCM - Manual (Page 91)

85
16. When the batch has operated for the specified time period, it will automatically shut off the pump's
motor.
17. If this a One Time Only batch, the display will show the batch completed message and the operating
mode will be set to manual.
BATCH #1 COMPLETED
PRESS ANY KEY
Press any key to clear the display.
MOTOR OFF
18. If this was a repeating batch, the display will return to {BATCH #X PENDING / HH:MM
MM/DD/YY} and the DLCM will wait until its internal clock matches the displayed Time/Date. At
that time, the batch will recycle.
BATCH #1 PENDING
6:54a 2/4/01
7.6.3.1 Inactivating The Batches
If the batch operation is not required to operate over a certain period of time, for instance the
weekend, the batches should be inactivated.
™
Batch Inactivation
1. Press [BATCH]. The screen will show the batch status: {BATCHES / ACTIVE}. Press [UP] to
change the display to {BATCH / INACTIVE}. Press [BATCH] to accept and inactivate the batches
and return to Manual Mode.