Pulsafeeder Pulsar DLCM - Manual (Page 85)

79
7.2.23 Language
All displayed text can be displayed in English, Spanish, French or German.
™
Language Set Up Procedure
1. Press [MENU]. Press [UP] or [DOWN] until {–MENU– / LANGUAGE} is displayed.
-MENU-
LANGUAGE
Press [ENTER] to continue through the language sub-menu.
2. The language type appears on the display. Press [UP] to scroll through the available languages.
LANGUAGE TYPE
ENGLISH
Press
[UP]
LANGUAGE TYPE
FRANCAIS
Press
[UP]
LANGUAGE TYPE
DEUTSCH
Press
[UP]
LANGUAGE TYPE
ESPANOL
When the correct language is displayed, press [ENTER] to activate. All text will be displayed in the
selected language.
3. The display returns to {–MENU– / LANGUAGE}.
7.2.24 Factory Default Settings
All of the DLCM settings can be returned to factory defaults.
™
Procedure for resetting the factory defaults
1. Press [MENU] and [UP] or [DOWN] until the {–MENU– / FACTORY DEFAULTS} screen is
displayed.
-MENU-
FACTORY DEFAULTS
Press [ENTER] to continue through the factory defaults sub-menu.
2. The display prompts you to not reset all the settings to the factory defaults.
FACTORY RESET?
NO
If a Factory Reset is not desired, press [ENTER] to go back to the {–MENU– / FACTORY
DEFAULTS} screen.
3. If the DLCM is to be reset to the factory defaults, press [UP] to scroll the value to {YES}.
FACTORY RESET?
YES
Press [ENTER] to accept your selection.
4. The display prompts you to verify your action.
Re-setting Factory Defaults will destroy all user calibration information.
ARE YOU SURE?
NO