beautypg.com

Accton Technology Edge-corE Fast Ethernet Switch ES3528M-SFP User Manual

Page 98

background image

Configuring the Switch

3-48

3

linkUp

1.3.6.1.6.3.1.1.5.4

A linkUp trap signifies that the SNMP entity,

acting in an agent role, has detected that the

ifOperStatus object for one of its

communication links left the down state and

transitioned into some other state (but not into

the notPresent state). This other state is

indicated by the included value of ifOperStatus.

authenticationFailure

1.3.6.1.6.3.1.1.5.5

An authenticationFailure trap signifies that the

SNMPv2 entity, acting in an agent role, has

received a protocol message that is not

properly authenticated. While all

implementations of the SNMPv2 must be

capable of generating this trap, the

snmpEnableAuthenTraps object indicates

whether this trap will be generated.

RMON Events (V2)
risingAlarm

1.3.6.1.2.1.16.0.1

The SNMP trap that is generated when an

alarm entry crosses its rising threshold and

generates an event that is configured for

sending SNMP traps.

fallingAlarm

1.3.6.1.2.1.16.0.2

The SNMP trap that is generated when an

alarm entry crosses its falling threshold and

generates an event that is configured for

sending SNMP traps.

Private Traps
swPowerStatus

ChangeTrap

1.3.6.1.4.1.259.8.1.4.2.1.0.1

This trap is sent when the power state changes.

swIpFilterRejectTrap

1.3.6.1.4.1.259.8.1.4.2.1.0.40

This trap is sent when an incorrect IP address is

rejected by the IP Filter.

a. These are legacy notifications and therefore must be enabled in conjunction with the corresponding traps

on the SNMP Configuration menu.

Table 3-5 Supported Notification Messages (Continued)

Object Label

Object ID

Description