Accton Technology Edge-corE Fast Ethernet Switch ES3528M-SFP - Manual (Page 387)

Authentication Commands
4-91
4
Example
Related Commands
dir (4-89)
whichboot (4-90)
Authentication Commands
You can configure this switch to authenticate users logging into the system for
management access using local or RADIUS authentication methods. You can also
enable port-based authentication for network client access using IEEE 802.1X.
Authentication Sequence
Console(config)#boot system config: startup
Console(config)#
Table 4-29 Authentication Commands
Command Group Function Page
Authentication Sequence Defines logon authentication method and precedence 4-91
RADIUS Client Configures settings for authentication via a RADIUS server 4-94
TACACS+ Client Configures settings for authentication via a TACACS+ server 4-98
AAA Configures authentication, authorization, and accounting for
network access
4-102
Port Security Configures secure addresses for a port 4-111
Port Authentication Configures host authentication on specific ports using 802.1X 4-112
Network Access Configures MAC authentication and dynamic VLAN assignment 4-121
Web Authentication Configures Web authentication 4-130
Table 4-30 Authentication Sequence
Command Function Mode Page
authentication login Defines logon authentication method and precedence GC 4-92
authentication enable Defines the authentication method and precedence for
command mode change
GC 4-93