Priority commands (layer 3 and 4), Show queue cos-map, Map ip dscp (global configuration) – Accton Technology Edge-corE Fast Ethernet Switch ES3528M-SFP User Manual
Page 565: Table 4-70

Priority Commands
4-269
4
Example
show queue cos-map
This command shows the class of service priority map.
Syntax
show queue cos-map [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-28)
• port-channel channel-id (Range: 1-8)
Default Setting
None
Command Mode
Privileged Exec
Example
Priority Commands (Layer 3 and 4)
map ip dscp (Global Configuration)
This command enables IP DSCP mapping (i.e., Differentiated Services Code Point
mapping). Use the no form to disable IP DSCP mapping.
Console#show queue bandwidth
Queue ID Weight
-------- ------
0 1
1 2
2 4
3 8
Console#
Console#show queue cos-map ethernet 1/1
Information of Eth 1/1
Traffic Class : 0 1 2 3 4 5 6 7
Priority Queue: 1 0 0 1 2 2 3 3
Console#
Table 4-70 Priority Commands (Layer 3 and 4)
Command
Function
Mode
Page
map ip dscp
Enables IP DSCP class of service mapping
GC
map ip dscp
Maps IP DSCP value to a class of service
IC
show map ip dscp
Shows the IP DSCP map
PE