Accton Technology Edge-corE Fast Ethernet Switch ES3528M-SFP - Manual (Page 363)

System Management Commands
4-67
4
Example
Related Commands
sntp client (4-65)
sntp poll (4-67)
show sntp (4-67)
sntp poll
This command sets the interval between sending time requests when the switch is
set to SNTP client mode. Use the no form to restore to the default.
Syntax
sntp poll seconds
no sntp poll
seconds - Interval between time requests. (Range: 16-16384 seconds)
Default Setting
16 seconds
Command Mode
Global Configuration
Example
Related Commands
sntp client (4-65)
show sntp
This command displays the current time and configuration settings for the SNTP
client, and indicates whether or not the local time has been properly updated.
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command displays the current time, the poll interval used for sending
time synchronization requests, and the current SNTP mode (i.e., unicast).
Console(config)#sntp server 10.1.0.19
Console(config)#sntp poll 60
Console(config)#