Accton Technology Edge-corE Fast Ethernet Switch ES3528M-SFP - Manual (Page 472)

Command Line Interface
4-176
4
Example
This example shows the configuration setting for port 24.
Console#show interfaces switchport ethernet 1/24
Broadcast threshold: Enabled, 64 Kbits/second
LACP status: Enabled
Ingress Rate Limit: Disabled, 100000 Kbits per second
Egress Rate Limit: Disabled, 100000 Kbits per second
VLAN membership mode: Hybrid
Ingress rule: Enabled
Acceptable frame type: All frames
Native VLAN: 1
Priority for untagged traffic: 0
Gvrp status: Disabled
Allowed Vlan: 1(u),
Forbidden Vlan:
Private-VLAN mode: NONE
Private-VLAN host-association: NONE
Private-VLAN mapping: NONE
Console#
Table 4-48 Interfaces Switchport Statistics
Field Description
Broadcast threshold Shows if broadcast storm suppression is enabled or disabled; if enabled it also
shows the threshold level (page 4-172).
Lacp status Shows if Link Aggregation Control Protocol has been enabled or disabled
(page 4-182).
Ingress rate limit Shows if ingress rate limiting is enabled, and the current rate limit. (page 4-179).
Egress rate limit Shows if egress rate limiting is enabled, and the current rate limit. (page 4-179).
VLAN membership mode Indicates membership mode as Trunk or Hybrid (page 4-245).
Ingress rule
Shows if ingress filtering is enabled or disabled (page 4-246).
Note: Ingress filtering is always enabled.
Acceptable frame type Shows if acceptable VLAN frames include all types or tagged frames only
(page 4-246).
Native VLAN Indicates the default Port VLAN ID (page 4-247).
Priority for untagged traffic Indicates the default priority for untagged frames (page 4-264).
Gvrp status
Shows if GARP VLAN Registration Protocol is enabled or disabled (page 4-240).
Allowed Vlan Shows the VLANs this interface has joined, where “(u)” indicates untagged and
“(t)” indicates tagged (page 4-248).
Forbidden Vlan Shows the VLANs this interface can not dynamically join via GVRP (page 4-249).
Private VLAN mode Shows the private VLAN mode as host, promiscuous, or none (4-257).
Private VLAN
host-association
Shows the secondary (or community) VLAN with which this port is associated
(4-258).
Private VLAN mapping Shows the primary VLAN mapping for a promiscuous port (4-259).