Show upnp, Spanning tree commands, Table 4-58 – Accton Technology Edge-corE Fast Ethernet Switch ES3528M-SFP User Manual
Page 513

Spanning Tree Commands
4-217
4
Related Commands
show upnp
This command displays the UPnP management status and time out settings.
Command Mode
Privileged Exec
Example
Spanning Tree Commands
This section includes commands that configure the Spanning Tree Algorithm (STA)
globally for the switch, and commands that configure STA for the selected interface.
Console#show upnp
UPnP global settings:
Status: Enabled
Advertise duration: 200
TTL: 20
Console#
Table 4-58 Spanning Tree Commands
Command
Function
Mode
Page
spanning-tree
Enables the spanning tree protocol
GC
spanning-tree mode
Configures STP, RSTP or MSTP mode
GC
spanning-tree forward-time Configures the spanning tree bridge forward time
GC
spanning-tree hello-time
Configures the spanning tree bridge hello time
GC
spanning-tree max-age
Configures the spanning tree bridge maximum age
GC
spanning-tree priority
Configures the spanning tree bridge priority
GC
spanning-tree
path-cost method
Configures the path cost method for RSTP/MSTP
GC
spanning-tree
transmission-limit
Configures the transmission limit for RSTP/MSTP
GC
spanning-tree
mst-configuration
Changes to MSTP configuration mode
GC
mst vlan
Adds VLANs to a spanning tree instance
MST
mst priority
Configures the priority of a spanning tree instance
MST
name
Configures the name for the multiple spanning tree
MST
revision
Configures the revision number for the multiple spanning
tree
MST
max-hops
Configures the maximum number of hops allowed in the
region before a BPDU is discarded
MST