Accton Technology Edge-corE Fast Ethernet Switch ES3528M-SFP - Manual (Page 594)

Command Line Interface
4-298
4
ip igmp filter (Global Configuration)
This command globally enables IGMP filtering and throttling on the switch. Use the
no form to disable the feature.
Syntax
[no] ip igmp filter
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• IGMP filtering enables you to assign a profile to a switch port that specifies
multicast groups that are permitted or denied on the port. An IGMP filter profile
can contain one or more, or a range of multicast addresses; but only one
profile can be assigned to a port. When enabled, IGMP join reports received
on the port are checked against the filter profile. If a requested multicast group
is permitted, the IGMP join report is forwarded as normal. If a requested
multicast group is denied, the IGMP join report is dropped.
• IGMP filtering and throttling only applies to dynamically learned multicast
groups, it does not apply to statically configured groups.
• The IGMP filtering feature operates in the same manner when MVR is used
to forward multicast traffic.
Example
ip igmp profile
This command creates an IGMP filter profile number and enters IGMP profile
configuration mode. Use the no form to delete a profile number.
Syntax
[no] ip igmp profile profile-number
profile-number - An IGMP filter profile number. (Range: 1-4294967295)
Default Setting
Disabled
Command Mode
Global Configuration
Console(config)#ip igmp filter
Console(config)#