Banner configure lp-number – Accton Technology Edge-corE Fast Ethernet Switch ES3528M-SFP User Manual
Page 330
Command Line Interface
4-34
4
ip-mask - The IP address and subnet mask of the device. (Maximum
length: 32 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
The user-entered data cannot contain spaces. The banner configure ip-lan
command interprets spaces as data input boundaries. The use of underscores
( _ ) or other unobtrusive non-letter characters is suggested for situations
where whitespace is necessary for clarity.
Example
banner configure lp-number
This command allows the administrator to configure the LP number information
displayed in the banner. Use the no form to remove the LP number information from
the banner display.
Syntax
banner configure lp-number lp-num
no banner configure lp-number
lp-num - The LP number. (Maximum length: 32 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
The user-entered data cannot contain spaces. The banner configure
lp-number command interprets spaces as data input boundaries. The use of
underscores ( _ ) or other unobtrusive non-letter characters is suggested for
situations where whitespace is necessary for clarity.
Example
Console(config)#banner configure ip-lan 192.168.1.1/255.255.255.0
Console(config)#
Console(config)#banner configure lp-number 12
Console(config)#