Accton Technology Edge-corE Fast Ethernet Switch ES3528M-SFP - Manual (Page 324)

Command Line Interface
4-28
4
Command Mode
Global Configuration
Example
hostname
This command specifies or modifies the host name for this device. Use the no form
to restore the default host name.
Syntax
hostname name
no hostname
name - The name of this host. (Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Banner
These commands are used to configure and manage administrative information
about the switch, its exact data center location, details of the electrical and network
circuits that supply the switch, as well as network administrator and manager contact
information. This information is only available via the CLI and is automatically
displayed before login as soon as a console or telnet connection has been
established.
Console(config)#prompt RD2
RD2(config)#
Console(config)#hostname RD#1
Console(config)#
Table 4-9 Banner Commands
Command Function Mode Page
banner configure Configures the banner information that is displayed before login GC 4-29
banner configure
company
Configures the Company information that is displayed by banner GC 4-30
banner configure
dc-power-info
Configures the DC Power information that is displayed by
banner
GC 4-31
banner configure
department
Configures the Department information that is displayed by
banner
GC 4-31
banner configure
equipment-info
Configures the Equipment information that is displayed by
banner
GC 4-32