Banner configure – Accton Technology Edge-corE Fast Ethernet Switch ES3528M-SFP User Manual

Page 325

System Management Commands

4-29

banner configure

This command allows the administrator to interactively specify administrative
information for this device.

Syntax

banner configure

Default Setting

None

Command Mode

Global Configuration

Command Usage

The administrator can batch-input all details for the switch with one command.
When the administrator finishes typing the company name and presses the
enter key, the script prompts for the next piece of information, and so on, until
all information has been entered. Pressing enter without inputting information
at any prompt during the script’s operation will leave the field empty. Spaces
can be used during script mode because pressing the enter key signifies the
end of data input. The delete and left-arrow keys terminate the script. The use
of the backspace key during script mode is not supported. If, for example, a
mistake is made in the company name, it can be corrected with the banner
configure company command.

banner configure

equipment-location

Configures the Equipment Location information that is displayed

by banner

4-33

banner configure

ip-lan

Configures the IP and LAN information that is displayed by

banner

4-33

banner configure

lp-number