Accton Technology Edge-corE Fast Ethernet Switch ES3528M-SFP - Manual (Page 399)

Authentication Commands
4-103
4
Example
server
This command adds a security server to an AAA server group. Use the no form to
remove the associated server from the group.
Syntax
[no] server {index | ip-address}
• index - Specifies the server index. (Range: RADIUS 1-5, TACACS+ 1)
• ip-address - Specifies the host IP address of a server.
Default Setting
None
Command Mode
Server Group Configuration
Command Usage
• When specifying the index for a RADIUS server, that server index must
already be defined by the radius-server host command (see page 4-95).
• When specifying the index for a TACACS+ server, that server index must
already be defined by the tacacs-server host command (see page 4-98).
Example
aaa accounting dot1x
This command enables the accounting of requested 802.1X services for network
access. Use the no form to disable the accounting service.
Syntax
aaa accounting dot1x {default | method-name} start-stop group {radius |
tacacs+ |server-group}
no aaa accounting dot1x {default | method-name}
• default - Specifies the default accounting method for service requests.
• method-name - Specifies an accounting method for service requests.
(Range: 1-255 characters)
• start-stop - Records accounting from starting point and stopping point.
• group - Specifies the server group to use.
Console(config)#aaa group server radius tps
Console(config-sg-radius)#
Console(config)#aaa group server radius tps
Console(config-sg-radius)#server 10.2.68.120
Console(config-sg-radius)#