Cluster member information, Cluster candidate information, Figure 3-155 cluster member information – Accton Technology Edge-corE Fast Ethernet Switch ES3528M-SFP User Manual
Page 293
IP Clustering
3-243
3
CLI – This example creates a new cluster Member by specifying the Candidate
switch MAC address and setting a Member ID.
Cluster Member Information
Displays current cluster Member switch information.
Command Attributes
• Member ID – The ID number of the Member switch. (Range: 1-36)
• Role – Indicates the current status of the switch in the cluster.
• IP Address – The internal cluster IP address assigned to the Member switch.
• MAC Address – The MAC address of the Member switch.
• Description – The system description string of the Member switch.
Web – Click Cluster, Member Information.
Figure 3-155 Cluster Member Information
CLI – This example shows information about cluster Member switches.
Cluster Candidate Information
Displays information about discovered switches in the network that are already
cluster Members or are available to become cluster Members.
Command Attributes
• Role – Indicates the current status of Candidate switches in the network.
• MAC Address – The MAC address of the Candidate switch.
• Description – The system description string of the Candidate switch.
Console(config)#cluster member mac-address 00-12-34-56-78-9a id 5
Console(config)#
Vty-0#show cluster members
Cluster Members:
ID: 1
Role: Active member
IP Address: 10.254.254.2
MAC Address: 00-12-cf-23-49-c0
Description: 24/48 L2/L4 IPV4/IPV6 GE Switch
Vty-0#