Accton Technology Edge-corE Fast Ethernet Switch ES3528M-SFP - Manual (Page 420)

Command Line Interface
4-124
4
Default Setting
1024
Command Mode
Interface Config
Example
network-access dynamic-qos
Use this command to enable the dynamic QoS feature for an authenticated port.
Use the no form to restore the default.
Syntax
[no] network-access dynamic-qos
Default Setting
Disabled
Command Mode
Interface Configuration
Example
The following example enables the dynamic QoS feature on port 1.
network-access dynamic-vlan
Use this command to enable dynamic VLAN assignment for an authenticated port.
Use the no form to disable dynamic VLAN assignment.
Syntax
[no] network-access dynamic-vlan
Default Setting
Enabled
Command Mode
Interface Configuration
Command Usage
• When enabled, the VLAN identifiers returned by the RADIUS server will be
applied to the port, providing the VLANs have already been created on the
switch. GVRP is not used to create the VLANs.
Console(config-if)#mac-authentication max-mac-count 32
Console(config-if)#
Console(config)#interface ethernet 1/1
Console(config-if)#network-access dynamic-qos
Console(config-if)#