Accton Technology Edge-corE Fast Ethernet Switch ES3528M-SFP - Manual (Page 429)

Authentication Commands
4-133
4
success-url - The URL to which a host is directed after a successful web
authentication login.
Default Setting
None
Command Mode
Global Configuration
Command Usage
This command is not supported in the current release of the firmware.
Example
web-auth quiet-period
This command defines the amount of time a host must wait after exceeding the
failed login attempts limit, before it may attempt web authentication again. Use the
no form to restore the default.
Syntax
web-auth quiet-period time
no web-auth quiet period
time - The amount of time the host must wait before attempting
authentication again. (Range: 1-180 seconds)
Default Setting
60 seconds
Command Mode
Global Configuration
Example
web-auth session-timeout
This command defines the amount of time a web-authentication session remains
valid. When the session-timeout time has been reached, the host is logged off and
must re-authenticate itself the next time data transmission takes place. Use the no
form to restore the default.
Syntax
web-auth session-timeout timeout
no web-auth session timeout
Console(config)#web-auth login-success-page-url http://www.example.com/
success/
Console(config)#
Console(config)#web-auth quiet-period 120
Console(config)#