Accton Technology Edge-corE Fast Ethernet Switch ES3528M-SFP - Manual (Page 427)

Authentication Commands
4-131
4
web-auth login-attempts
This command defines the limit for failed web authentication login attempts. After the
limit is reached, the switch refuses further login attempts until the quiet time expires.
Use the no form to restore the default.
Syntax
web-auth login-attempts count
no web-auth login-attempts
count - The limit of allowed failed login attempts. (Range: 1-3)
Default Setting
3 login attempts
Command Mode
Global Configuration
Example
web-auth login-fail-page-url
This command defines the external URL to which a host is directed after a failed
web authentication attempt. Use the no form to restore the default.
Syntax
web-auth login-fail-page-url fail-url
no web-auth login-fail-page-url
web-auth
quiet-period
Defines the amount of time to wait after the limit for failed
login attempts is exceeded.
GC 4-133
web-auth
session-timeout
Defines the amount of time a session remains valid GC 4-133
web-auth
system-auth-control
Enables web authentication globally for the switch GC 4-134
web-auth Enables web authentication for an interface IC 4-134
show web-auth Displays global web authentication parameters PE 4-135
show web-auth
interface
Displays interface-specific web authentication parameters
and statistics
PE 4-135
web-auth re-authenticate
(Port)
Ends all web authentication sessions on the port and
forces the users to re-authenticate
PE 4-136
web-auth re-authenticate (IP) Ends the web authentication session associated with the
designated IP and forces the user to re-authenticate
PE 4-136
show web-auth
summary
Displays a summary of web authentication port
parameters and statistics
PE 4-136
Console(config)#web-auth login-attempts 2
Console(config)#
Table 4-37 Web Authentication (Continued)
Command Function Mode Page