Samsung SPH-L900TSASPR - Manual (Page 133)

1. Press and then tap > Settings > Connections.
2. Tap Wi-Fi, and then tap the ON/OFF switch beside Wi-Fi to turn Wi-Fi On. Wi-Fi must
be On to configure settings.
3. Configure these settings:
 Add Wi-Fi network: Connect to a new Wi-Fi network. For more information,
see Wi-Fi .
 Scan: Search for available Wi-Fi networks.
 Wi-Fi Direct: Connect to other Wi-Fi Direct devices. For more information, see Wi-Fi
Direct .
Other Wi-Fi Settings
Set up and manage wireless access points.
1. Press and then tap > Settings > Connections.
2. Tap Wi-Fi, and then tap the ON/OFF switch to turn Wi-Fi On. Wi-Fi must be On to
configure settings.
3. Tap to configure these settings:
 Advanced:
• Network notification: When enabled, your phone alerts you when a new Wi-Fi
network is available.
• Passpoint: When turned On, your phone will connect to passpoint-enabled Wi-Fi
networks automatically.
• Sort by: Choose a sorting order for Wi-Fi networks on the Wi-Fi screen.
• Keep Wi-Fi on during sleep: Specify when to switch from Wi-Fi to mobile data
for data communications, when the device goes to sleep (when the backlight
goes out). This setting can affect data usage, and the behavior of devices you
connect to your device, such as when using it as a hotspot.
• Always allow scanning: When enabled, your phone will allow Google location
service and other apps to scan for networks, even when Wi-Fi is turned off.
• Auto network switch: When enabled, your phone will automatically switch
between known Wi-Fi networks and mobile networks. Known Wi-Fi networks are
those you have already connected to.
Settings 121