Ag Leader GPS 2100 Operators Manual - Manual (Page 47)

GPS 2000/2100 Software
Ag Leader Technology
April 1998 4-3
5 Click the Data Type button.
6 The Data Type Prefs window appears on the screen. The first time
the program is used to connect to the GPS 2000/2100, 10 of the 20
possible data type names already will be named. These are
changeable; they are just default names. Follow these steps to
change a name:
Step Action
1 Click on the name in the Change to: column.
Result: A window labeled Change “Name” to…? appears.
2 Type in the new name in the white area.
3 Click OK or press enter on the keyboard when you are
finished.
7 Click the Update GPS Memory button to update the GPS 2000/2100
with the name you just changed.
Note: You can wait until you have made all your changes if you
like.
8 •
Click the Reload All button.
or
•
Click on the name that was changed to access a small window,
then click the Reload button.
Note: Either method reloads the names stored in the GPS
2000/2100. The difference in methods is that the Reload All button
reloads all the names in the GPS 2000/2100 memory, but the Reload
button reloads only the current name.
Result: The unit should indicate the name changed in the previous
steps.
9 Click the Close button after you are finished making changes.
Changing Field
Names Follow these steps to change field names:
Step Action
1 Repeat steps 1 through 4 in the procedures for Changing Data Type
Names.
2 Click the Field button.
3 Put the GPS 2000/2100 in LOAD MEM mode if it is not already,
then click OK or press Enter.
Note: 256 fields can be named, which requires time to transfer
names to and from the GPS 2000/2100. If you do not want to wait